Pilot Login

Login with Password

Test Report

Skywalk X-Alps 5 85+ | 0822-36400

Equipment
Skywalk X-Alps 5 85+ | 0822-36400
Production Date: April 2022
Service
Passed
Rating
Used, good conditions
Comment
EP110N
Date
21. July 2026
Next Service
July 2028 or after 100 flight hours
Service Center
Eagles Service di Di Ciano Lavinia

Checker: Lavinia Di Ciano
Notice
Your glider has undergone a service. Before flying, it is essential that you test-inflate and thoroughly check it.

Gallery

Repair

Description INTERVENTI DI RIPARAZIONE SU TAGLI E ABRASIONI TROVATI SULLA PUNTA DELLA SEMIALA SINISTRA.
ESTRADOSSO =CASSONI 19-20-22-25-26-27-30-31-32-33.
INTRADOSSO =CASSONI 31-33

Porosity Test

Gauge HELLO

1. Measurement > 250 [s]

Rating Passed

Fabric Tear Resistance

Bettsometertest Passed

Visual Inspection: Canopy

Rods Passed

Loops Passed

Topsail Passed

Cell walls Passed

Lower sail Passed

Leading edge Passed

Rating Passed

Visual Inspection: Lines

Main lines Passed

Brake lines Passed

Gallery lines Passed

Rating Passed

Visual Inspection: Risers

Risers Passed

Line locks Passed

Speed system Passed

Rating Passed

Linen Tear Strength

Right / A1 Minimum strength: 126 daN / Measured strength: 140 daN - Passed

Rating Passed

Trimm

Mainlines
ST 3 2 1 1 2 3 ST
SL SL SL → AS+ SL → AS+
A
SL → AS+ SL → AS+ SL SL
SL → AS+ SL → DL SL → AS
B
SL → AS SL → AS SL → AS+
The left brake line was extendet by 9mm. The right brake line was extendet by 12mm.
SL
DL
AS
AS+
AS++
Description of Paraglider Trimming

Chord Line and Angle of Attack in Paragliders
  • Chord Line: The imaginary straight line running from the leading edge (front) to the trailing edge (back) of the paraglider profile. It represents the basic shape of the wing.
  • Angle of Attack: The angle between the chord line of the paraglider and the oncoming airflow. It is crucial for determining how much lift the wing generates.

Comparison: Optimally Trimmed vs. Out-of-Trim Paraglider
  1. Optimally Trimmed Paraglider
    • Chord Line: The chord line is relatively straight and continuous from the leading to the trailing edge. The profile is evenly tensioned with no significant deformations.
    • Angle of Attack: The angle of attack is relatively constant across the span and optimal for the current flight condition (e.g., straight flight). Air flows smoothly over and under the profile, generating efficient lift with minimal drag. The wing flies stably, glides well, and is easy to control.
    Imagine a smooth, even curvature of the wing, with airflow gliding cleanly over the top and bottom surfaces.
  2. Out-of-Trim Paraglider
    A paraglider is "out of trim" when the line lengths are no longer correct, usually due to aging, uneven loading, or improper repairs. This leads to profile deformation.
    • Chord Line: The chord line is no longer straight or even. Depending on the type of trim error (e.g., A-lines too long, B- or C-lines too short, or vice versa), the profile may be deformed in certain areas.
      • Example: Brake lines (or C-lines) too short relative to B/A: The trailing edge is pulled down more than intended. The chord line bends downward at the rear, increasing the camber.
      • Example: A-lines too long (or B/C-lines too short relative to A): The leading edge is more "open" or pushed upward, while the rest of the profile may be flatter. The chord line at the front forms a different angle to the flight direction.
    • Angle of Attack: The angle of attack is uneven and often suboptimal across the span.
      • With a downward-pulled trailing edge, the local angle of attack increases, causing more drag and less efficiency. The wing may respond sluggishly, glide poorly, and be more prone to stalls.
      • With a deformed leading edge, the angle of attack may be too low, increasing the risk of front collapses.
    Imagine the wing having "bumps" or "dents" in some places, disturbing the smooth airflow and making the wing less efficient and potentially unsafe.

Summary:
A diagram would show that, in an optimally trimmed paraglider, the chord line forms a clean, efficient shape and the angle of attack is consistent everywhere. In an out-of-trim paraglider, the chord line bends or curves unevenly, resulting in a suboptimal and varying angle of attack, which negatively affects flight characteristics.

Linen Length: Left

A Linen
Left / A Linen
Ref. Act. Diff.
7329 7338 9
7295 7299 4
7251 7255 4
7257 7260 3
7185 7188 3
7153 7150 -3
7111 7110 -1
7113 7111 -2
7001 7001 0
6952 6956 4
6879 6881 2
6872 6875 3
6802 6799 -3
6769 6772 3
6748 6746 -2
6760 6754 -6
Average 1
Tolerance (-10,10)
ST Linen
Left / ST Linen
Ref. Act. Diff.
6556 6540 -16
6561 6547 -14
6535 6523 -12
6569 6555 -14
Average -14
Tolerance (-15,10)
B Linen
Left / B Linen
Ref. Act. Diff.
7323 7328 5
7288 7289 1
7243 7248 5
7249 7249 0
7177 7181 4
7147 7144 -3
7102 7101 -1
7109 7107 -2
Average 1
Tolerance (-10,10)
C Linen
Left / C Linen
Ref. Act. Diff.
7293 7293 0
7258 7260 2
7214 7213 -1
7221 7224 3
7151 7153 2
7120 7123 3
7078 7081 3
7083 7083 0
6980 6973 -7
6933 6929 -4
6862 6858 -4
6856 6849 -7
6792 6791 -1
6763 6760 -3
6741 6734 -7
6751 6745 -6
Average -2
Tolerance (-10,10)
D Linen
Left / D Linen
Ref. Act. Diff.
7358 7357 -1
7324 7323 -1
7278 7277 -1
7285 7284 -1
7201 7199 -2
7169 7169 0
7126 7125 -1
7123 7119 -4
Average -1
Tolerance (-10,10)
BR Linen
Left / BR Linen
Ref. Act. Diff.
7884 7860 -24
7572 7562 -10
7360 7363 3
7174 7183 9
7140 7138 -2
6947 6953 6
6846 6855 9
6884 6887 3
6840 6843 3
6710 6716 6
6729 6733 4
6676 6687 11
6812 6798 -14
Average 0
Tolerance (-10,50)

Linen Length: Right

A Linen
Right / A Linen
Ref. Act. Diff.
7329 7335 6
7295 7295 0
7251 7253 2
7257 7260 3
7185 7189 4
7153 7149 -4
7111 7107 -4
7113 7111 -2
7001 7000 -1
6952 6952 0
6879 6877 -2
6872 6873 1
6802 6799 -3
6769 6772 3
6748 6750 2
6760 6755 -5
Average 0
Tolerance (-10,10)
ST Linen
Right / ST Linen
Ref. Act. Diff.
6556 6542 -14
6561 6547 -14
6535 6527 -8
6569 6559 -10
Average -12
Tolerance (-15,10)
B Linen
Right / B Linen
Ref. Act. Diff.
7323 7327 4
7288 7288 0
7243 7243 0
7249 7254 5
7177 7177 0
7147 7147 0
7102 7098 -4
7109 7110 1
Average 1
Tolerance (-10,10)
C Linen
Right / C Linen
Ref. Act. Diff.
7293 7294 1
7258 7260 2
7214 7216 2
7221 7219 -2
7151 7152 1
7120 7120 0
7078 7080 2
7083 7084 1
6980 6976 -4
6933 6927 -6
6862 6862 0
6856 6854 -2
6792 6793 1
6763 6763 0
6741 6736 -5
6751 6746 -5
Average -1
Tolerance (-10,10)
D Linen
Right / D Linen
Ref. Act. Diff.
7358 7356 -2
7324 7324 0
7278 7278 0
7285 7284 -1
7201 7199 -2
7169 7166 -3
7126 7125 -1
7123 7123 0
Average -1
Tolerance (-10,10)
BR Linen
Right / BR Linen
Ref. Act. Diff.
7884 7866 -18
7572 7560 -12
7360 7360 0
7174 7177 3
7140 7133 -7
6947 6952 5
6846 6856 10
6884 6893 9
6840 6844 4
6710 6715 5
6729 6734 5
6676 6682 6
6812 6802 -10
Average 0
Tolerance (-10,50)