Customer Login

Test Report

Ozone Ultralite 4 23 | UL4_23_ER_S_45E_279

Equipment
Ozone Ultralite 4 23 | UL4_23_ER_S_45E_279
Production Date: Mar 2018
Service
Passed
Rating
Used, good conditions
Date
13. February 2026
Next Service
February 2028
Service Center
WE FLY Checkcenter
Franz-Senn-Str. 162
6167 Neustift
Checker: Dominik Tschoder
Notice
Your glider has undergone a service. Before flying, it is essential that you test-inflate and thoroughly check it.

Porosity Test

Gauge JDC

1. Measurement 239 [s]

Rating Passed

Fabric Tear Resistance

Bettsometertest Passed

Visual Inspection: Canopy

Rods Passed

Loops Passed

Topsail Passed

Cell walls Passed

Lower sail Passed

Leading edge Passed

Rating Passed

Visual Inspection: Lines

Main lines Passed

Brake lines Passed

Gallery lines Passed

Rating Passed

Visual Inspection: Risers

Risers Passed

Line locks Passed

Speed system Passed

Rating Passed

Linen Tear Strength

Comment Nicht nötig.

Rating Passed

Trimm

Mainlines
ST 3 2 1 1 2 3 ST
SL SL SL SL
A
SL SL SL SL
SL SL SL
B
SL → DL SL → DL SL
SL SL SL
C
SL SL SL
The left brake line was extendet by 44mm. The right brake line was extendet by 38mm.
SL
DL
AS
AS+
AS++
Description of Paraglider Trimming

Chord Line and Angle of Attack in Paragliders
  • Chord Line: The imaginary straight line running from the leading edge (front) to the trailing edge (back) of the paraglider profile. It represents the basic shape of the wing.
  • Angle of Attack: The angle between the chord line of the paraglider and the oncoming airflow. It is crucial for determining how much lift the wing generates.

Comparison: Optimally Trimmed vs. Out-of-Trim Paraglider
  1. Optimally Trimmed Paraglider
    • Chord Line: The chord line is relatively straight and continuous from the leading to the trailing edge. The profile is evenly tensioned with no significant deformations.
    • Angle of Attack: The angle of attack is relatively constant across the span and optimal for the current flight condition (e.g., straight flight). Air flows smoothly over and under the profile, generating efficient lift with minimal drag. The wing flies stably, glides well, and is easy to control.
    Imagine a smooth, even curvature of the wing, with airflow gliding cleanly over the top and bottom surfaces.
  2. Out-of-Trim Paraglider
    A paraglider is "out of trim" when the line lengths are no longer correct, usually due to aging, uneven loading, or improper repairs. This leads to profile deformation.
    • Chord Line: The chord line is no longer straight or even. Depending on the type of trim error (e.g., A-lines too long, B- or C-lines too short, or vice versa), the profile may be deformed in certain areas.
      • Example: Brake lines (or C-lines) too short relative to B/A: The trailing edge is pulled down more than intended. The chord line bends downward at the rear, increasing the camber.
      • Example: A-lines too long (or B/C-lines too short relative to A): The leading edge is more "open" or pushed upward, while the rest of the profile may be flatter. The chord line at the front forms a different angle to the flight direction.
    • Angle of Attack: The angle of attack is uneven and often suboptimal across the span.
      • With a downward-pulled trailing edge, the local angle of attack increases, causing more drag and less efficiency. The wing may respond sluggishly, glide poorly, and be more prone to stalls.
      • With a deformed leading edge, the angle of attack may be too low, increasing the risk of front collapses.
    Imagine the wing having "bumps" or "dents" in some places, disturbing the smooth airflow and making the wing less efficient and potentially unsafe.

Summary:
A diagram would show that, in an optimally trimmed paraglider, the chord line forms a clean, efficient shape and the angle of attack is consistent everywhere. In an out-of-trim paraglider, the chord line bends or curves unevenly, resulting in a suboptimal and varying angle of attack, which negatively affects flight characteristics.

Linen Length: Left

A Linen
Left / A Linen
Ref. Act. Diff.
6266 6260 -6
6232 6232 0
6223 6226 3
6266 6263 -3
6260 6258 -2
6241 6239 -2
6252 6247 -5
6295 6294 -1
6335 6329 -6
6271 6267 -4
6269 6265 -4
6230 6228 -2
6207 6203 -4
6224 6221 -3
Average -3
Tolerance (-10,10)
ST Linen
Left / ST Linen
Ref. Act. Diff.
5880 5876 -4
5859 5866 7
5900 5904 4
5982 5983 1
5765 5764 -1
5793 5794 1
5805 5800 -5
5856 5860 4
Average 1
Tolerance (-15,10)
B Linen
Left / B Linen
Ref. Act. Diff.
6189 6185 -4
6150 6156 6
6150 6157 7
6193 6199 6
6185 6191 6
6175 6178 3
6189 6191 2
6236 6240 4
6301 6298 -3
6243 6241 -2
6242 6244 2
6210 6211 1
6190 6189 -1
6204 6207 3
Average 2
Tolerance (-10,10)
C Linen
Left / C Linen
Ref. Act. Diff.
6263 6271 8
6237 6240 3
6233 6240 7
6275 6277 2
6266 6271 5
6247 6256 9
6263 6265 2
6312 6316 4
6366 6364 -2
6313 6307 -6
6307 6306 -1
6267 6268 1
6241 6244 3
6248 6251 3
Average 3
Tolerance (-10,10)
D Linen
Left / D Linen
Ref. Act. Diff.
6395 6399 4
6363 6366 3
6370 6367 -3
6401 6403 2
6398 6393 -5
6375 6370 -5
6381 6378 -3
6422 6416 -6
6456 6458 2
6391 6394 3
6381 6382 1
6332 6335 3
6298 6300 2
6295 6297 2
Average 0
Tolerance (-10,10)
BR Linen
Left / BR Linen
Ref. Act. Diff.
6932 6933 1
6712 6706 -6
6542 6540 -2
6454 6452 -2
6373 6372 -1
6319 6321 2
6212 6213 1
6195 6198 3
6253 6254 1
6187 6182 -5
6185 6183 -2
6152 6151 -1
6161 6163 2
6216 6222 6
Average 0
Tolerance (-10,50)

Linen Length: Right

A Linen
Right / A Linen
Ref. Act. Diff.
6266 6260 -6
6232 6226 -6
6223 6226 3
6266 6262 -4
6260 6262 2
6241 6240 -1
6252 6252 0
6295 6295 0
6335 6331 -4
6271 6267 -4
6269 6267 -2
6230 6227 -3
6207 6203 -4
6224 6219 -5
Average -2
Tolerance (-10,10)
ST Linen
Right / ST Linen
Ref. Act. Diff.
5880 5878 -2
5859 5867 8
5900 5904 4
5982 5982 0
5765 5764 -1
5793 5793 0
5805 5802 -3
5856 5857 1
Average 1
Tolerance (-15,10)
B Linen
Right / B Linen
Ref. Act. Diff.
6189 6182 -7
6150 6151 1
6150 6152 2
6193 6189 -4
6185 6189 4
6175 6170 -5
6189 6188 -1
6236 6236 0
6301 6300 -1
6243 6244 1
6242 6244 2
6210 6208 -2
6190 6188 -2
6204 6205 1
Average -1
Tolerance (-10,10)
C Linen
Right / C Linen
Ref. Act. Diff.
6263 6269 6
6237 6242 5
6233 6240 7
6275 6279 4
6266 6267 1
6247 6252 5
6263 6267 4
6312 6315 3
6366 6366 0
6313 6308 -5
6307 6310 3
6267 6270 3
6241 6246 5
6248 6249 1
Average 3
Tolerance (-10,10)
D Linen
Right / D Linen
Ref. Act. Diff.
6395 6398 3
6363 6370 7
6370 6370 0
6401 6405 4
6398 6395 -3
6375 6377 2
6381 6382 1
6422 6419 -3
6456 6461 5
6391 6396 5
6381 6385 4
6332 6339 7
6298 6303 5
6295 6299 4
Average 3
Tolerance (-10,10)
BR Linen
Right / BR Linen
Ref. Act. Diff.
6932 6928 -4
6712 6707 -5
6542 6538 -4
6454 6449 -5
6373 6372 -1
6319 6318 -1
6212 6213 1
6195 6199 4
6253 6252 -1
6187 6186 -1
6185 6186 1
6152 6154 2
6161 6168 7
6216 6225 9
Average 0
Tolerance (-10,50)