Pilota

Conferma la nuova password

Certificato di revisione

Advance Alpha 7 28 | 104320

Attrezzature
Advance Alpha 7 28 | 104320
Data di produzione: June 2024
Service
Superato
Valutazione
Usato, in ottime condizioni
Data
21. Luglio 2026
Prossima revisione
Luglio 2028 o dopo 150 ore di volo.
Centro assistenza tecnica
myCheck48.de

Revisionatore: Wolfgang Hogen
Avviso
Il tuo Parapendio è stato sottoposto a un Service.
Prima di volare, è essenziale che tu faccia un test di gonfiaggio e un controllo accurato.

Galleria

Test di porosità

Calibro HELLO

1. Misurazione 1260 [s]

Valutazione Superato

Test di resistenza meccanica del tessuto

Bettsometro Superato

Ispezione visiva: Vela

Stecche Superato

Loops Superato

Estradosso Superato

Centine Superato

Intradosso Superato

Bordo d'attacco Superato

Valutazione Superato

Ispezione visiva: Linee

Linee principali Superato

Linee dei freni Superato

Linee della galleria Superato

Bei Leine a 3 rechts wurde eine Beschädigung festgestellt. Für diese Leine wurde ein Ersatz angefertigt und in den Schirm eingebaut.

Valutazione Superato

Ispezione visiva: Bretelle

Bretelle Superato

Connessione cordini Superato

Acceleratore Superato

Valutazione Superato

Test di carico

Destra / 1A1 Resistenza minima: 166 daN / Resistenza misurata: 237 daN - Superato

Destra / 1B1 Resistenza minima: 126 daN / Resistenza misurata: 168 daN - Superato

Valutazione Superato

Trimm

Linee principali
ST 3 2 1 1 2 3 ST
SL SL SL SL
A
SL SL SL SL
SL SL SL
B
SL SL SL
SL SL SL
C
SL SL SL
Il freno sinistro è stato allungato di 21mm. Il freno destro è stato allungato di 20mm.
SL
DL
AS
AS+
AS++
Description of Paraglider Trimming

Chord Line and Angle of Attack in Paragliders
  • Chord Line: The imaginary straight line running from the leading edge (front) to the trailing edge (back) of the paraglider profile. It represents the basic shape of the wing.
  • Angle of Attack: The angle between the chord line of the paraglider and the oncoming airflow. It is crucial for determining how much lift the wing generates.

Comparison: Optimally Trimmed vs. Out-of-Trim Paraglider
  1. Optimally Trimmed Paraglider
    • Chord Line: The chord line is relatively straight and continuous from the leading to the trailing edge. The profile is evenly tensioned with no significant deformations.
    • Angle of Attack: The angle of attack is relatively constant across the span and optimal for the current flight condition (e.g., straight flight). Air flows smoothly over and under the profile, generating efficient lift with minimal drag. The wing flies stably, glides well, and is easy to control.
    Imagine a smooth, even curvature of the wing, with airflow gliding cleanly over the top and bottom surfaces.
  2. Out-of-Trim Paraglider
    A paraglider is "out of trim" when the line lengths are no longer correct, usually due to aging, uneven loading, or improper repairs. This leads to profile deformation.
    • Chord Line: The chord line is no longer straight or even. Depending on the type of trim error (e.g., A-lines too long, B- or C-lines too short, or vice versa), the profile may be deformed in certain areas.
      • Example: Brake lines (or C-lines) too short relative to B/A: The trailing edge is pulled down more than intended. The chord line bends downward at the rear, increasing the camber.
      • Example: A-lines too long (or B/C-lines too short relative to A): The leading edge is more "open" or pushed upward, while the rest of the profile may be flatter. The chord line at the front forms a different angle to the flight direction.
    • Angle of Attack: The angle of attack is uneven and often suboptimal across the span.
      • With a downward-pulled trailing edge, the local angle of attack increases, causing more drag and less efficiency. The wing may respond sluggishly, glide poorly, and be more prone to stalls.
      • With a deformed leading edge, the angle of attack may be too low, increasing the risk of front collapses.
    Imagine the wing having "bumps" or "dents" in some places, disturbing the smooth airflow and making the wing less efficient and potentially unsafe.

Summary:
A diagram would show that, in an optimally trimmed paraglider, the chord line forms a clean, efficient shape and the angle of attack is consistent everywhere. In an out-of-trim paraglider, the chord line bends or curves unevenly, resulting in a suboptimal and varying angle of attack, which negatively affects flight characteristics.

Lunghezza delle linee: Left

A Linen
Left / A Linen
Ref. Act. Diff.
7443 7439 -4
7397 7398 1
7346 7345 -1
7325 7325 0
7231 7233 2
7113 7112 -1
7050 7046 -4
Media -1
Tolleranza (-10,10)
ST Linen
Left / ST Linen
Ref. Act. Diff.
6712 6710 -2
6728 6724 -4
6481 6480 -1
6549 6548 -1
Media -2
Tolleranza (-15,10)
B Linen
Left / B Linen
Ref. Act. Diff.
7318 7321 3
7277 7280 3
7234 7235 1
7219 7219 0
7160 7159 -1
7060 7060 0
7010 7007 -3
Media 0
Tolleranza (-10,10)
C Linen
Left / C Linen
Ref. Act. Diff.
7415 7419 4
7383 7386 3
7375 7378 3
7331 7333 2
7310 7314 4
7343 7346 3
7226 7229 3
7107 7109 2
7034 7039 5
Media 3
Tolleranza (-10,10)
D Linen
Left / D Linen
Ref. Act. Diff.
7517 7522 5
7484 7484 0
7475 7473 -2
7427 7430 3
7405 7406 1
7427 7428 1
7304 7307 3
7174 7176 2
7084 7086 2
Media 2
Tolleranza (-10,10)
BR Linen
Left / BR Linen
Ref. Act. Diff.
7821 7827 6
7579 7588 9
7400 7410 10
7323 7335 12
7180 7195 15
7061 7074 13
6993 7006 13
6988 7001 13
6835 6839 4
6781 6785 4
6684 6694 10
6583 6595 12
Media 10
Tolleranza (-10,50)

Lunghezza delle linee: Right

A Linen
Right / A Linen
Ref. Act. Diff.
7443 7438 -5
7397 7399 2
7346 7344 -2
7325 7328 3
7231 7228 -3
7113 7109 -4
7050 7044 -6
Media -2
Tolleranza (-10,10)
ST Linen
Right / ST Linen
Ref. Act. Diff.
6712 6707 -5
6728 6724 -4
6481 6482 1
6549 6550 1
Media -2
Tolleranza (-15,10)
B Linen
Right / B Linen
Ref. Act. Diff.
7318 7314 -4
7277 7278 1
7234 7235 1
7219 7219 0
7160 7159 -1
7060 7058 -2
7010 7005 -5
Media -1
Tolleranza (-10,10)
C Linen
Right / C Linen
Ref. Act. Diff.
7415 7417 2
7383 7384 1
7375 7378 3
7331 7332 1
7310 7310 0
7343 7346 3
7226 7225 -1
7107 7105 -2
7034 7032 -2
Media 1
Tolleranza (-10,10)
D Linen
Right / D Linen
Ref. Act. Diff.
7517 7519 2
7484 7483 -1
7475 7476 1
7427 7432 5
7405 7402 -3
7427 7426 -1
7304 7305 1
7174 7174 0
7084 7086 2
Media 1
Tolleranza (-10,10)
BR Linen
Right / BR Linen
Ref. Act. Diff.
7821 7822 1
7579 7586 7
7400 7404 4
7323 7330 7
7180 7193 13
7061 7070 9
6993 7003 10
6988 6995 7
6835 6840 5
6781 6788 7
6684 6695 11
6583 6595 12
Media 8
Tolleranza (-10,50)